VoIP over Motorola Canopy 900MHz

[Socal Telephone]

I was wondering if anyone has had success using voip over 900MHz to be even more specific the Motorola Canopy 900MHz. I am pretty sure it won't be reliable for voip due to bandwidth limitations and the higher latencies associated with this frequency, but I would like to get opinions and some hands on input from others to verify so I can tell my boss that there is no way for it to be reliable. Jitter is about 2 or 3 on average and latencies are from 30ms up to 500ms. Now I know 100ms is max for Voip but if its possible to get these down would it work? Thanks

[MidcalBroadband]

We use voip on our Canopy network wothout any problems. We use 5.7 and 900. As long as the latency isnt over 100 you shouldnt have any problems.

[shawno66]

We have a customer that runs an entire Voip based PBX on a 900 SM, it works really well.
MidcalBroadband is right, good ping times are the key, both across your network to your T1 and out to your Voip provider.

[wifiwizard]

Isn't Motorola Canopy being phased out by the end of this year?

[adamsr1]

I tested a voip site over canopy and my phones were cutting out...
can anyone help?