Cannot access wired network via Aironet 340 AP

[peppino]

It used to work, but now I'm unable to fix this problem.
My notebook which connects to the router wia an Aironet 340 AP, with a 350 series PCMCIA card, can browsw the internet, but can not access the rest of the wired network.
I'm not even able to ping those PCs, I've tried the resetall command, set up the stuff again, but the same came out.
I'm getting disperate... Help!!!:-)

P.S.: I also use an Ipaq with a PCMCIA sleeve and a 350 card for browsing, and there is the same situation. That's why I believe, there should be something with the AP...

[badger11]

You might have public secure packet forwarding turned on. This prevents clients on the wireless side from communicating with each other but you should still be able to telnet to other network devices on the wired side. PSPF is enabled by default.

[peppino]

Hi Badger11,

Thanks for you reply, I started to search for the PSPF setting, but didnT find it. Can you tell me where to look it up?
By the way, when the unit was new, it used to work without setting this thing.

[peppino]

I've found it. But it looks like it is enabled by default. There is something else. Today I made a test with a Linksys AP. It worked...
So it's the Cisco AP for sure.