mauriga
08-01-2003, 01:59 PM
Hi,
this is my 1st post (the italian community can't help me).
I'm newby and sorry 4 my bad English.
Here the matter:
I've an D-link A.P. and a PCI wireless card on PC#1 and an USR Robotics adapter on PC#2
Everyone can UL from me at the speed of about 500K/s (when I'm wired the max speed reachable is about 900K/s).
But when I DL files from other people I only reach the speed of 100K/s, and after few minutes of DL the speed further decrease.
There aren't big walls in my flat; WEP encryption is OK; I tried to change all 13 channels; I also associated cards' MAC addresses with A.P.
I tried to modify all the configurations parameters (e.g. fragmentation theresold or short preamble) but the problem is always the same.
Thanks 4 your help.
mau---
this is my 1st post (the italian community can't help me).
I'm newby and sorry 4 my bad English.
Here the matter:
I've an D-link A.P. and a PCI wireless card on PC#1 and an USR Robotics adapter on PC#2
Everyone can UL from me at the speed of about 500K/s (when I'm wired the max speed reachable is about 900K/s).
But when I DL files from other people I only reach the speed of 100K/s, and after few minutes of DL the speed further decrease.
There aren't big walls in my flat; WEP encryption is OK; I tried to change all 13 channels; I also associated cards' MAC addresses with A.P.
I tried to modify all the configurations parameters (e.g. fragmentation theresold or short preamble) but the problem is always the same.
Thanks 4 your help.
mau---